ComColor® FT5430
Ultra Fast, Full-Color Printing
- Print Speed: 140 ppm
- Print Size: A3
- Full Color CMYK
- 3 Feed Trays
- Low Energy Consumption
- Environmental Certification
FT Accessories
RS-160 Envelope Feeder
Increase Your Productivity
- Automatically matches speed of the printer
- Feeds a large variety of envelope sizes
- Increases and maximizes production throughput
- Continuous top-load, bottom feed system
- Quick setup, easy to operate
- Compact size
- Easy to move
- Accommodates envelopes ranging in size from 4″ x 6″ to 9″ x 12″, and weights from 20-28 lb. bond envelopes (75-110 GSM).
RISO SC-36 Sequencing Conveyor/Stacker
Get the Most Out of Your Production Equipment
- Variable speed
- Left or right hand operation
- Heavy duty adjustable height stand
- Material sensor so motor only runs during production
- Continuous run or material sensor modes
- Material ramp at end creates stacks
- Optional knock-down roller assembly catches and controls material at high speed offering a controlled shingle
Scanner HS7000
- Auto feeder enables simultaneous duplex scanning
- Scanning at 100 ppm
- Single and duplex copying at 80 ppm
- Maximum 200-sheet loading capacity
- Scan sizes up to A3
Face Down Finisher G10
- Supports high-speed printing at 160ppm
- Offset stacking and stapling of up to 50 sheets (100 pages)
- Maximum 1,000-sheet loading capacity
Additional 2,000 Sheet Feeder FG20
- Maximum capacity of 2,000 A4 sheets (A4 long-edge feed)
- Paper replenishable even during printing
Multifunction Finisher FG20
- Top-tray printing at main unit speed of 160 ppm
- In-line printing, stapling, hole punching, and folding
- Enables production of over 120 60-page A4 duplex booklets per hour
Auto-Control Stacking Tray II
- Paper guides automatically open to the correct width to match the paper in use
- 1,000-sheet capacity
Wide Stacking Tray
- Accommodates paper sizes up to 550 mm (long-edge feed)
- 1,000-sheet capacity
PS Kit FG10
When installed, enables functions such as Tray Selection Per Page, Color Profile, and Form Overlay, enhancing efficiency
Low Running Costs
Proprietary ink and color profile development enable high quality at low running cost. Short printing time means reduced labor and electricity costs.
High Image Quality
Piezo drop-on-demand print heads provide fast-drying oil-based ink for minimal bleeding and smearing. New, higher black density improves visibility with a resolution of 600dpi.
High Media Flexibility
The FT5430 can accommodate lightweight to heavyweight paper, as well as envelopes. 46gsm-400gsm (when optional accessories attached).
Expanded Usability
The optional PS kit supports a variety of operating systems, and PDF files can be printed directly from USB flash drives, while RISO Print-S application allows printing from smart devices. ComColor FT5430 offers reliable support for any work environment.
Energy-Saving Functions
New features allow you to automatically power the machine on and off at specified times. Up to 10 sets of combinations of start or end time and day of the week can be registered. Users can also set when the printer enters Sleep Mode after the last print job, further decreasing power consumption. This mode keeps power consumption to a miniscule 4W, further enhancing savings on electricity bills. All ComColor machines are ENERGY STAR® certified, and boast many other energy-efficient innovations.
High Productivity
With a print speed of 120 ppm, duplex scanning and a rich feature set, ComColor FT5430 brings a new level of productivity to any workplace. You'll also appreciate its modest footprint - the ideal choice where space is at a premium. Affordable on-demand, full-color printing ensures smooth operation to increase efficiency.
FORCEJET™ Technology
Stable paper feeding ensures the reliable performance necessary for high-speed printing. Paper-feed speed is intelligently controlled, according to how much ink is emitted from the print head. Multiple sensors help ensure high levels of reliability. Instant-drying ink complements the high-speed, duplex printing capability. This specially developed, oil-based ink is also fade-resistant and water-resistant, and minimizes paper curling.
Useful Scanner Functions
The optional Scanner HS7000 can save scanned data over the network to a PC, as an attachment to e-mail, or onto a hard disk of a networked RISO machine. Multi-page documents can be saved in PDF format as either separate files or combined into one file. Documents can be saved as PDF, TIFF, JPEG and PDF/A (suitable for long-term storage) formats.
Simple Operation
An easy-to-view touch panel with instantly recognizable color icons makes printer operation simple for anyone. The tilt panel ensures excellent viewing at any angle up to 90 degrees, expanding installation flexibility. Scan preview windows show scanned images before saving data, ensuring less scan failures. For added convenience when printing and copying, frequently used functions can be saved as Favorites.
Specs
Print Type
Line-type inkjet system
Ink Type
Oil-based pigment ink (Cyan, Magenta, Yellow, Black)
Print Resolution
Standard: 300 dpi (main scanning direction) × 300 dpi (sub-scanning direction)
Fine: 300 dpi (main scanning direction) × 600 dpi (sub-scanning direction)
Number of Gray Levels
For each CMYK color (11 gray levels)
Data Processing Resolution
Standard: 300 dpi x 300 dpi
Fine: 600 dpi x 600 dpi
Line smoothing: 600 dpi × 600 dpi
PDL (Page Description language)
RISORINC/C IV
Supported Protocols
TCP/IP, HTTP, HTTPs (TLS), DHCP, FTP, LPR, IPP, SNMP (SNMP v1), Port 9100 (RAW port), IPv4, IPv6, IPSec (IKEv1)
Supported Operating Systems
Microsoft®: Windows®, Windows Server®
Optional Operating Systems
(Optional PS Kit FG10 or ComColor Express RS1200C is required.)
Mac: macOS
Linux (compatible with PPD only)
Network Interface
Ethernet 1000BASE-T/100BASE-TX/10BASE-T×2 Channel
Memory Capacity
4GB
Hard Disk
(One gigabyte (GB) is calculated as 1 billion bytes.)
Capacity: 500GB
Available Space: Approx. 430 GB
Operating System
Linux
Printing Speeds
Warm-up Time
2 min. 30 sec. or less (at room temperature of 23°C (73.4°F)
First Print Time
(Within 10 minutes after the last print job)
5 sec. or less (A4 long-edge feed)
Continuous Print Speed
When using plain paper or recycled paper (85 gsm (23-lb bond), and density setting 3 (Standard) Chart used: Print measurement pattern [Color measurement sample 2 (JEITA standard pattern J6)]. The continuous print speed varies depending on the type of optional output equipment connected.
A4 and Letter long-edge feed
Simplex: 140 ppm
Duplex: 70 sheets/minute (140 ppm)
A4
Simplex: 108 ppm
Duplex: 54 sheets/minute (108 ppm)
B4 (JIS)
Simplex: 90 ppm
Duplex: 42 sheets/minute (84 ppm)
A3
Simplex: 79 ppm
Duplex: 39 sheets/minute (78 ppm)
Paper
Standard Tray Size
Maximum: 340 mm x 550 mm (13 3/8″ x 21 5/8″)
Minimum: 90 mm x 148 mm (3 9/16″ x S 27/32″)
Feed Tray Size
Maximum: 297 mm x 432 mm (11 11/16″ x 17″)
Minimum: 182 mm x 182 mm (7 3/16″ x 7 3/16″)
Printable Area
Maximum: 310 mm x 544 mm (12 3/16″ x 21 13/32″)
Guaranteed Print Area
(The margin when printing envelopes is 10 mm (3/8″). The guaranteed area when printing images is the area enclosed within 5 mm (7/32″) of the edges of the paper.)
Standard: Margin width of 5 mm (7 /32″)
Maximum: Margin width of 3 mm (1/8″)
Paper Weight: Standard Tray
Simplex: 46 gsm to 210 gsm (12-lb bond to 56-lb bond)
Duplex: 46 gsm to 210 gsm (12-lb bond to 56-lb bond) for A4 and Letter
46 gsm to 104 gsm (12-lb bond to 28-lb bond) for Ledger, A3, legal, and B4
Paper Weight: Feed Tray
Simplex/Duplex: 52 gsm to 104 gsm (14-lb bond to 28-lb bond)
Paper Tray Capacity: Standard Tray
Height up to 110 mm (4 5/16″)
Paper Tray Capacity: Feed Tray
Height up to 56 mm (2 3/16″) (x 2 trays)
Output Tray Capacity
Height up to 56 mm (2 3/16″)
Operating Environment
Power Source
AC 100-240 V, 10.0-5.0 A, 50-60 Hz
Power Consumption
Max. 1,000W
Ready (Without printing and temperature adjustment operation): 95 W or less
Sleep (When setting [(Power Consumption On sleep)] to [Low].): 2 W or less
Stand-by: 0.4 W or less
Operating Noise
65 dB (A) or less at printing
Operating Environment
Temperature: 15ºC to 30ºC
Humidity: 40% to 70% RH (non-condensing)
Dimensions (W x D x H)
In use: 1,030 mm × 735 mm × 1,115 mm
With cover and tray closed: 775 mm × 710 mm × 970 mm
Dimensions When Operating (W x D x H)
With the front cover open and the operation panel in the upright position:
1,185 mm × 1,225 mm × 1,115 mm
Weight
Approx. 137 kg
Accessories
Scanner HS7000, Additional 2000 Sheet Feeder FG20, Face Down Finisher F10, Multifunction Finisher FG20/Folder Unit FG20, Auto-Control Stacking Tray II, Wide Stacking Tray, ComColorExpress RS1200C, PS Kit FG10, IC Card Authentication Kit II, Envelope Feed Kit, Card Feed Kit
Related Videos
Complete this form and one of our knowledgeable representatives will be in touch to follow up.
Prefer to speak to someone right away?
Call us at 978-739-3422
Printers for Endless Possibilities